Props

The standard UNI EN1065 requires a classification of props according to their capacity and provides specific geometrical and mechanical prescriptions for each parts that compose the element. The same standard introduces a series of prescriptions that certify the quality of adjustable telescopic steel props with covered or exposed thread, designed for use in the construction site.

For this purpose, the standard identifies specific materials, project requirements, protection alternatives against corrosion and check methods employing both structural calculations and experimental tests.

CEP10

CEP – CONDOR European Props comply with the European standard. The CEP10 prop is easy to handle and light with a 10 kN minimum capacity. Four types of props (CEP10-250; CEP10-300; CEP10-350; CEP10-400) suitable to cover heights from 1,50m to 4,00m.

CEP20

The CEP20 prop is easy to handle and light with a 20 kN minimum capacity. Five types of props (CEP20-300; CEP20-350; CEP20-400; CEP20-450; CEP20-500) suitable to cover heights from 1,80m to 5,00m

CEP30

The CEP30 prop is easy to handle and light with a 30 kN minimum capacity. Three types of props (CEP30-300; CEP30-350; CEP30-400) suitable to cover heights from 1,80m to 4,00 m.

Props ALU CP

ALU CP props have a variable height from 1.80m to 6.00m. Light weight thanks to aluminum profiles, but with extremely high load capacity. The specific thread with self-cleaning nut ensures continuous cleaning and allows a fast regulation in the construction site. They can be used singularly up to 6m or as standards in shoring tower for higher heights.

Slabs Props ECON